Page 1 of 1
Old guage overhaul needed
Posted: Tue Jan 22, 2008 10:51 am
by soko121
Where would you send old military type guages for repair or overhaul?
can they do metric/European guages?
Posted: Tue Jan 22, 2008 2:28 pm
by Airlift48
I would give Consolidated Instrument of Teterboro Nj a call. They have been in the business since 1946 and have an excellent reputation. They have serviced our instruments for a long time and are very good.
Ask for Eric Johannssen or OBJ Johannssen and tell them that we referred you.
http://www.consolidatedinstrument.com/
Located at Historic Teterboro Airport
510 Industrial Avenue
Teterboro, New Jersey 07608
Phone: (201) 288-1189
Fax: (201) 288-8006
Posted: Tue Jan 22, 2008 10:19 pm
by pmahaffey
Ralph Stahl has been overhauling our instruments on the B-17 for years, and does top notch work. A great guy too. He is at NW Regional Airport (52F)
Patrick Mahaffey
B-17 "Chuckie" pilot/mechanic
B-25 "Pacific Prowler pilot/mechanic
Stahl Air Instruments Inc.
101 Lindbergh Dr
Roanoke, TX 76262
(817) 430-8589
Instrument Overhaul
Posted: Wed Jan 23, 2008 12:39 pm
by N77657
Will any of these shops do an instrument that has a radium face? What do people usually do about getting period instruments overhauled if they have a radium face?
Posted: Thu Jan 24, 2008 2:07 pm
by Eric Friedebach
There are still a few shops that will remove radium during the overhaul process, but there are EPA compliant procedures.
Air Parts may still do this kind of work, 570-748-0823
Posted: Sun Mar 23, 2008 9:51 pm
by BTdriver
Try Keystone insturements in lock haven PA they will do insturments with radium on them