Mustang part to ID....

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.

Switch to full style
A place where restoration project-type threads can go to avoid falling off the main page in the WIX hangar. Feel free to start threads on Restoration projects and/or warbird maintenance here. Named in memoriam for Gary Austin, a good friend of the site and known as RetroAviation here. He will be sorely missed.
Post a reply
Paul Patist
  • Paul Patist
  • Posts: 175
  • Joined: Sun May 02, 2004 4:59 pm
  • Location: Oudkarspel, The Netherlands

Mustang part to ID....

Fri Jan 01, 2010 7:35 am

This part comes from a 38FS/55FG crashsite in Luxembourg. It seems 4 very thin cables (1mm in diameter) were attached to it. Could it be from the (Eastman Kodak) gunsight?
First I thought of some trim device but the P-51D/K manual shows other ones...

Regards,

Paul


Image
ausflyboy
  • ausflyboy
  • Posts: 212
  • Joined: Fri Feb 02, 2007 9:18 pm
  • Location: Brisbane

Re: Mustang part to ID....

Sun Feb 07, 2010 2:41 am

It is off the side of the Gyro Gun Sight . where the range dial is
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

phpBB Mobile / SEO by Artodia.

Board index