Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

Looking for Blueprints - P-40
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=19&t=51896		 Page 1 of 1
Author:  AURktman [ Sun Jan 12, 2014 1:43 pm ]
Post subject:  Looking for Blueprints - P-40
I am looking for a set of detailed blueprints for the P-40, all models (if possible). I know there will be some gaps in there, missing information, variances between as-drawn and as-built, etc. What I am looking to do is start with small parts / sections and build one from scratch.

I have seen the digital blueprints on sale for several places ranging from $48 to $10k, several out of Australia for around $250. If I can start out with just a few drawings (tail preferably, but anything even as small as a gear door, access ), then I can get started in the end of March / early April and probably finish around May 2030 :D . Can anyone share a vendor's name/link which has the best drawings for the price?

Many thanks!
Author:  WIXerGreg [ Fri Jan 17, 2014 8:53 pm ]
Post subject:  Re: Looking for Blueprints - P-40
You might try contacting 'Hang the Expense' on this forum, he can probably steer you in the right direction.
Author:  AURktman [ Fri Jan 17, 2014 11:06 pm ]
Post subject:  Re: Looking for Blueprints - P-40
Fantastic! Thanks!
Author:  Brenden S [ Sat Jan 18, 2014 4:47 am ]
Post subject:  Re: Looking for Blueprints - P-40
Ash Briggs in Melbourne has all the bits to make one up. It will save you a lot of time and money. Pretty much order a set and then put it together like a giant airfix kit. PM me if you want his details.
Author:  AURktman [ Sat Jan 18, 2014 3:00 pm ]
Post subject:  Re: Looking for Blueprints - P-40
Please pass along that contact info. I am more interested in building the parts myself, but I do know it will probably take more time and money. I am quite certain that there will be a few parts along the way that I will buy to expedite certain milestones.

The reason I need the prints of the tail section is that over the summer I am going to work on a replica tail for where I work at Tuskegee University. It will be a display for them in the Chappie James Museum. Since it will be out of my pocket for the materials, I can afford to donate the material and time, but not what it would cost to have someone else make the tail section for me. It's a bit of a labor of love for me.

This (mine, not the Tuskegee tail) will be slow-going as I am 40 now and I plan on finishing it before I turn 65. :D
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/