Warbird Information Exchange
https://www.warbirdinformationexchange.org/phpBB3/

A photo essay on building the 787 Dreamliner
https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=17&t=51921		 Page 1 of 1
Author:  Pat Carry [ Tue Jan 14, 2014 10:59 am ]
Post subject:  A photo essay on building the 787 Dreamliner
www.chicagotribune.com/business/chi-biz ... otogallery
Author:  airknocker [ Fri Jan 17, 2014 9:27 am ]
Post subject:  Re: A photo essay on building the 787 Dreamliner
*** BOEING HIRING EVENTS ***

Charleston, South Carolina

787 - DREAMLINER PRODUCTION



For 7 plus years verifiable experience $28.00 pay rate:

n total compensation with PD included is $38.00/hr - $42.00 for OT

$8.00 S/T

$160 Daily Per Diem for up to 5 days – Equates to $800 weekly / $20.00 hourly

$42.00 O/T

$400 additional PD weekly

$500.00 Travel

$3000 completion bonus (still no answer about if this is gross or net)



For under 7 years experience $23.00 pay rate:

n total compensation with PD included is $33.00/hr - $34.50 for OT

$8.00 S/T

$120 Daily Per Diem for up to 5 days – Equates to $600 weekly / $15.00 hourly

$34.50 O/T

$400 additional PD weekly

$500.00 Travel

$3000 completion bonus (still no answer about if this is gross or net)





INCLUDING A ONE NIGHT HOTEL STAY

THE NIGHT BEFORE THE ASSESSMENT



Boeing is Requiring a 5 Minute Interview (fundamental questions) and

an Assessment Test (hands on – approximately 4 hours)



1. If interested, and would like to apply for this job, please reply back with a resume.

2. If assembly is not your current endeavor, send your resume anyway

and we will find you something more fitting.

3. If not interested, simply disregard.





IMPORTANT NOTE:

v In addition to your resume, please reply back with your Birth Month and Birth Day (not the year – just the month and day).

Without this, you will not be submitted. Boeing’s new system requires this.




Boeing / Aircraft Assembly (787 Structures) / Charleston, SC



US Person Required:
*** US Citizen or US Permanent Resident ***

Job Description:
Job Description: General Information Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc., to accomplish Shop Order Instances (SOIs). Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Boeing procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by higher grade employees and within the same level of skill required of the duties described herein. Remove and/or replace installed components and any related parts. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Coordinate pertinent information with employees on other shifts. Ability to work any shift (days, evenings and midnights), stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required. Must be able to work any shift required and may be asked to change shifts with limited notice. Teammates must have the ability to perform the following physical requirements: • Pass visual acuity and color perception tests • Read, write, and comprehend the English language • Use personal protective equipment for face/eyes and ears as required • Handle, use, and dispose of hazardous material • Obtain & maintain personal certifications as required to support job responsibilities • Occasional (1 to 3 hrs) finger manipulation • On occasion, a 2-person lift may be necessary for weights greater than 50 lbs • Occasional lifting of 21-35 pounds • Frequent reaching overhead (3 to 6 hrs) • Frequent walking on flat surfaces • Frequent standing flat or uneven surfaces • Frequent balancing on a ladder, steps, or uneven surfaces • Occasional climbing on 3-12 ft ladders or stands • Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls • Occasional contact with metals • Exposure to plastics and solvents to atmospheric conditions • Frequent exposure to noise Successful completion of an Assessment is a requirement to be submitted for this position. Assessment details are TBD. SUCCESSFUL COMPLETION OF A 3-WEEK TRAINING CLASS IS A REQUIREMENT TO BE RETAINED FOR THIS POSITION. TRAINING SCHEDULE TBD AND MAY OCCUR ON ANY SHIFT. FOLLOWING COMPLETION OF THE TRAINING CLASS, SHIFT ASSIGNMENTS WILL BE MADE.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/