| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| ADC or ACE Cirrus Engine parts? https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=16&t=12633 |
Page 1 of 1 |
| Author: | Mark_Pilkington [ Sat Apr 21, 2007 6:31 pm ] |
| Post subject: | ADC or ACE Cirrus Engine parts? |
Gents, I am interested in acquiring non-servicible parts for a ADC Cirrus I (60HP), the upright 4 cylinder used in the early DH60 etc. I have previously advertised for ADC Cirrus parts in the WIX flea market but recently traded my ADC Cirrus II 90hp parts for an incomplete ADC Cirrus I 60hp display engine and are now chasing parts to complete it for museum display. (the mark II parts are going into a runnable engine rebuild). I am seeking unservicealbe parts suitable for use on a museum dispaly engine. I am after 2x cylinder barrels, 3x cylinder heads, carb, manifold and accessories, in any condition suitable for a static display engine?? I am interested in parts from either the ADC Cirrus mark I or mark II. I am also interests in any parts from the equivalent ACE Cirrus engines built in the USA. Anyone got any leads on such parts?? regards Mark Pilkington |
|
| Author: | Mark_Pilkington [ Wed Nov 28, 2007 7:50 am ] |
| Post subject: | |
bump, Gents, I am interested in acquiring non-servicible parts for a ADC Cirrus I (60HP), the upright 4 cylinder used in the early DH60 etc. I have previously advertised for ADC Cirrus parts in the WIX flea market but recently traded my ADC Cirrus II 90hp parts for an incomplete ADC Cirrus I 60hp display engine and are now chasing parts to complete it for museum display. (the mark II parts are going into a runnable engine rebuild). I am seeking unservicealbe parts suitable for use on a museum dispaly engine. I am after 2x cylinder barrels, 3x cylinder heads, carb, manifold and accessories, in any condition suitable for a static display engine?? I am interested in parts from either the ADC Cirrus mark I or mark II. I am also interests in any parts from the equivalent ACE Cirrus engines built in the USA. Anyone got any leads on such parts?? regards Mark Pilkington |
|
| Author: | Mark_Pilkington [ Sat Dec 22, 2007 6:55 am ] |
| Post subject: | |
bump |
|
| Author: | BrianB [ Thu Dec 27, 2007 11:13 pm ] |
| Post subject: | |
If I recall correctly, Ed Clark (Mr. Moth) has some Cirrus parts in his shop down near LAX. Ed passed away several years ago and I don't know what happened to his massive collection of American and British moth parts and assorted other jewels. Walking through his shop was like nothing I have ever done before..... stuff piled everywhere but Ed knew what he had and where it was down to the last bolt and nut. |
|
| Author: | airknocker [ Sun Mar 02, 2008 2:51 pm ] |
| Post subject: | |
Try Ed Hammerle who advertised in TAP last year, an Ace cirrus engine. He has several a/c including a DH82A, AOP 9 Auster. PA-18 and a Staggerwing. Name HAMMERLE EDWARD A Street PO BOX 91 City SCHUYLER LAKE State NEW YORK Zip Code 13457-0091 County OTSEGO Country UNITED STATES |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|