That is weird dors...get outta my head
Seems like with all of the U.S. made T-6 models that someone would have done the BT-13. There are several PT models, too.
Thanks, PJ
| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Vultee Valiant BT-13 https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=15&t=5512 |
Page 1 of 2 |
| Author: | PJ [ Tue Nov 15, 2005 9:00 am ] |
| Post subject: | Vultee Valiant BT-13 |
Does anyone make a good model of the Vultee Vibrator? Thanks, PJ |
|
| Author: | dors [ Tue Nov 15, 2005 12:26 pm ] |
| Post subject: | |
Quote: Does anyone make a good model of the Vultee Vibrator?
Bizarre... I was just logging on to ask the same question. I haven't found anything yet in my searching |
|
| Author: | Tony C [ Tue Nov 15, 2005 1:41 pm ] |
| Post subject: | |
I believe that PLANET plan on releasing a 1/48 resin kit and SANGER produced a vacform kit, also in 1/48 (see SAN4861 on the Hannants website) http://www.hannants.co.uk No date or information on the PLANET kit but the website is http://www.luft46.com/Planet/catalog.html HTH Tony |
|
| Author: | PJ [ Wed Nov 16, 2005 7:32 am ] |
| Post subject: | |
That is weird dors...get outta my head Seems like with all of the U.S. made T-6 models that someone would have done the BT-13. There are several PT models, too.
Thanks, PJ |
|
| Author: | RyanShort1 [ Wed Nov 16, 2005 9:08 am ] |
| Post subject: | |
Anyone know of a good set of BT-13 drawings? I'd like to get ahold of some. Ryan |
|
| Author: | PJ [ Thu Dec 08, 2005 7:20 am ] |
| Post subject: | |
Guess no one has BT-13 drawings or plans. |
|
| Author: | Steve T [ Wed Dec 14, 2005 8:14 pm ] |
| Post subject: | |
Hi all-- Far as Valiant kits go, I know of two in 1:72, both now out of production and rather rare. One by Pavla was reportedly not bad; another by Beechnut (iirc) was pretty wretched, or so I'm told. I too had been hunting for a Valiant kit, needed for my "Project Walt" 1:72 diorama of a piece of the Soplata collection as it looked in the early 80s. Ultimately I kitbashed a BT-15 out of bits from a Testors Texan, an Academy P-40B, and a funny little Soviet-made kit of a Yak-40 airliner! Which works okay in the context of my diorama: but if you're looking to model an operational BT, you'll still need a real kit... Cheers S. |
|
| Author: | PJ [ Thu Dec 15, 2005 7:31 am ] |
| Post subject: | |
Thanks,Steve. Still looking for any scale plans...Anyone? PJ |
|
| Author: | Chad Veich [ Fri Dec 16, 2005 8:33 am ] |
| Post subject: | |
PJ, I have not been able to track down any drawings of the BT but Brian Taylor does a nice plan for a 73" R/C version that is available through Bob Holman in Ca. Brian Taylor is well known in R/C circles for the accuracy of his plans and the BT looks spot on to me. Brian usually will not design a model unless he has a full size that he can personally measure to make certain of scale fidelity. I don't know what your intentions are for the drawings but I'm sure you could scale the Taylor drawing to whatever size you like if you are looking at building a flying or static model. Here is a less than stellar pic of Brian's prototype. 
|
|
| Author: | Thunderhead7 [ Sat Dec 17, 2005 4:45 pm ] |
| Post subject: | |
A kit was available by Classic Castings Limited 1989 (I have it), it is a 1/48th Resin kit. It included vacuformed canopy and gear fairings, with white metal landing gear and tires and resin engine. The address and phone is (found on business card in kit) Farris Brown 1520 Pesnell Drive Gardensdale, AL 35071 (205) 631-8473 Cheers, Stephen http://www.herkynoseart.com Tucson, AZ |
|
| Author: | jaldo [ Sat Dec 17, 2005 8:30 pm ] |
| Post subject: | |
Hope this helps: 
|
|
| Author: | PJ [ Mon Dec 19, 2005 9:45 am ] |
| Post subject: | |
Thanks. That does give me something to go by. PJ |
|
| Author: | DanteC [ Fri Nov 17, 2006 1:09 am ] |
| Post subject: | |
Mike West of Lone Star Models released a 1/48 resin BT-13 a few months ago. I saw it at the IPMS nationals...sweet looking and finely detailed. The BT is an often overlooked topic. I have one ordered, but they are in short supply...order soon! Dante |
|
| Author: | Bob Henry [ Wed Nov 29, 2006 10:07 am ] |
| Post subject: | Vultee BT-13 |
I am currently working on a Vultee. The kit was released by Nor-Cal Aero. This will be a flyable R/C model. The scale is 1.75 in / Foot. I think the kit is no longer available, but I have seen it turn up at swap meets. It is pretty accurate on its scale outline, but not perfect. I'm going a little crazy with it by trying to duplicate functional scale external hinging for both flaps and ailerons. Since the wingspan is 73.5 inches, the hinging is a little small to work with. I will be shooting for completion before the end of the '07 flying season. This plane has some good things going for it, as far as its R/C flyability. It has a tall rudder, a fair amount of dihedral, and fixed landing gear. I hope it works well. If anyone knows the location of some good detailed photos for the yellow/blue paint scheme, please let me know. After I got this kit, I found out that Bob Holman Plans has a good set of plans available for the Vultee. They were done by Brian Taylor, the former British scalemasters champ. I have some other Taylor plans, so I can guess that they are probably very detailed. |
|
| Author: | Chuck Gardner [ Mon Dec 08, 2008 9:52 pm ] |
| Post subject: | |
Any news on 1/48 scale BT-13 models available?? I need one for a display |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|