Page 1 of 3
*Update F86* Corsair Zero A10 Apache C130 Soda Can Models
Posted: Fri Feb 17, 2012 9:55 pm
by JLO
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Fri Feb 17, 2012 10:42 pm
by C VEICH
Wow! That is some pretty amazing tin bending you've done there JLO. Nice work.
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Fri Feb 17, 2012 10:47 pm
by Cherrybomber13
That is a new level of Awesomeness!!

Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 6:31 am
by aeroeng
Super cool. They look great.
aeroeng
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 2:49 pm
by RyanShort1
Are those modified card model designs?
Ryan
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 3:10 pm
by JLO
These are my own designs. I started by doing the designing without computer aid. It took forever
The A10, Zero and C130 I designed them using 3d programming. It really really speeds things up. Now I find the designing as much fun as the building.
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 7:09 pm
by Tiger Tim
Cool stuff. Ever think of doing a Mustang but with the cans inside out?
-Tim
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 7:29 pm
by JLO
Tiger Tim wrote:Cool stuff. Ever think of doing a Mustang but with the cans inside out?
-Tim
I had planned on giving that a try but I found that going against the normal curvature of the can leads to lots of small imperfections. It might be possible to take a diet pepsi ,which has a pretty good sized area of unprinted surface, and make an all unfinished aluminum look. That would be really neat looking.
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sat Feb 18, 2012 8:18 pm
by RyanShort1
That's very similar to the work guys do here:
http://www.papermodelers.comRyan
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sun Feb 19, 2012 9:05 am
by Scott Rose
Those are some amazing models. I have one question for you. How many bandages did you go thru?
Seriously, those are great. I love the A-10.
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sun Feb 19, 2012 10:00 am
by JLO
I have built 9 planes in as many months. Believe it or not, I have yet to cut myself once. What cracks me up is my brother came over Thursday, picked up my C130, and sliced his finger open. hehehehehehehehe
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Sun Feb 19, 2012 5:51 pm
by Steve Nelson
Oh man those are cool!
Considering the A-10's "retro" style, making one out of "throwback" cans is especially appropriate.
SN
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Wed Feb 22, 2012 1:41 pm
by k5083
We do a lot of griping on this forum about old planes being turned into cans. But I was just looking over on SCIX (Soda Can Information Xchange) and they are really upset about perfectly good cans being turned into airplanes.
Also, there is a big flaming thread there about those retro Mountain Dew cans being the wrong color.
August
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Wed Feb 22, 2012 3:57 pm
by Zachary
I have seen soda/beer can airplanes before, but these take the detail to a whole other level! Super cool! Now, how about a P-47?
Zack
Re: Corsair Mitsibishi A10 Apache C130 Aluminum Can Models
Posted: Wed Feb 22, 2012 4:52 pm
by Bear
One word....Outstanding!!!!
