| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| ?Mesh screening for F4U-4 engine air intakes https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=15&t=39235 |
Page 1 of 1 |
| Author: | dane [ Mon Dec 27, 2010 9:48 am ] |
| Post subject: | ?Mesh screening for F4U-4 engine air intakes |
I want to add the ductwork below the R-2800 18W in my F4U-4 model, either showing it in place below engine or have ducting on ground in front of plane. I need to know if the intake trunking behind the accessory section firewall had screening or was the engine cowling lip completely open with no filter? Is there a drawing showing how carb ducting was run for a -4? What is the best thing to use for the mesh? A little off topic, what would work best for the intake screening of a 1/48 MV-22 Osprey? I'm building Prototype #4. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|