| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| P-40B 1/48 parts needed https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=15&t=33910 |
Page 1 of 1 |
| Author: | Nathan [ Tue Dec 29, 2009 2:04 pm ] |
| Post subject: | P-40B 1/48 parts needed |
Same story as the PBY. I want to finish my two P-40B models but due to cat attacks I am missing some parts. Parts needed for P-40B 1/48 Hobbycraft kit: props and spinner, wing guns, two canopies, landing gear.  Any help would be wonderful. Thanks, Nathan |
|
| Author: | TAdan [ Wed Dec 30, 2009 10:29 am ] |
| Post subject: | Re: P-40B 1/48 parts needed |
Nathan, I have a large cache of early 1/48 P-40 kits and spares. I'll see what I can dig up. I have mix of Monogram and Academy/Hobbycraft kits... |
|
| Author: | Nathan [ Wed Dec 30, 2009 11:43 am ] |
| Post subject: | Re: P-40B 1/48 parts needed |
Hey that would be great! Thanks! What kind of Hobbycraft kits do you have? Are they complete? Just curious... |
|
| Author: | TAdan [ Wed Dec 30, 2009 12:22 pm ] |
| Post subject: | Re: P-40B 1/48 parts needed |
Nathan wrote: Hey that would be great! Thanks! What kind of Hobbycraft kits do you have? Are they complete? Just curious... in 1/48... One Academy/Hobbycraft P-40B/C built in AVG markings (#77) and one still in the box. One Academy/Hobbycraft P-36 built. So I have the spares/extras from the two assembled kits as well as a good amount of Monogram P-40B/C spares. I moved recently and purged my collection of "spares" (about a 30gal rubber maid container worth of extra parts ) But I made it a point to save all of my P-40 stuff.So, you need: (2) props and spinners, (8) wing guns, (2) sets of landing gear, (2) canopies? I doubt I'll have all of it but I may have some of it. |
|
| Author: | Nathan [ Wed Dec 30, 2009 2:36 pm ] |
| Post subject: | Re: P-40B 1/48 parts needed |
Yeah those are the parts I need. |
|
| Author: | TAdan [ Wed Dec 30, 2009 2:59 pm ] |
| Post subject: | Re: P-40B 1/48 parts needed |
Ok, I just checked on the parts. I can give you two monogram four piece canopy sets. I compared them to the Academy kit (which is the same as the hobby craft kit if I remember correctly, but you may want to double check first) and they are slightly larger, which means you should be able to trim them a bit. They are pretty close. I can also give you four weighted tires from the Academy kits. Sorry, no props or guns to spare. As far as landing gear, you could probably scratch build the struts from a piece of sprue. I've gt plenty of Monogram landing gear doors. Let me know. |
|
| Author: | Nathan [ Thu Dec 31, 2009 8:05 pm ] |
| Post subject: | Re: P-40B 1/48 parts needed |
I'll take what you got. What do you want for them? Thanks, Nate |
|
| Author: | TAdan [ Fri Jan 01, 2010 12:01 pm ] |
| Post subject: | Re: P-40B 1/48 parts needed |
PM inbound... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|