| Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
| Hot Wheels car you won't believe! https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=15&t=32818 |
Page 1 of 1 |
| Author: | p51 [ Sun Nov 01, 2009 4:40 pm ] |
| Post subject: | Hot Wheels car you won't believe! |
There's a WW2 Jeep hot wheels car just out that is serious hot rodded but neat anyway. Mine is at work so I can't take a photo of that. What I did just find was pretty neat too, a B-17 car! I'm posting this as many people here have at least an affinity for the B-17. I don't collect hot wheels but I troll the toy aisles for "Sarge" stuff from the Disney movie, "Cars" so I usually pass Hot Wheels stuff when looking there: 
|
|
| Author: | K5DH [ Sat Nov 14, 2009 1:04 pm ] |
| Post subject: | |
The "Fast Fortress" in your photo is about the fourth color scheme that "car" has been released in. The original release was OD green with period markings, including tiny nose art! I have that one sitting on my desk at work. . . 
Cheers, |
|
| Author: | p51 [ Mon Nov 16, 2009 10:45 pm ] |
| Post subject: | Re: Hot Wheels car you won't believe! |
I didn’t know that, but then again I don’t collect stuff like that. I seriously considered taking it apart and painting it like a 91st BG B-17, but it’s riveted together and I don’t know if I’d be able to get it back together afterward. Yesterday I saw two more of them while walking past the die cast car area. |
|
| Author: | K5DH [ Sun Nov 22, 2009 9:52 pm ] |
| Post subject: | Re: Hot Wheels car you won't believe! |
p51 wrote: I didn’t know that, but then again I don’t collect stuff like that. I seriously considered taking it apart and painting it like a 91st BG B-17, but it’s riveted together and I don’t know if I’d be able to get it back together afterward. Yesterday I saw two more of them while walking past the die cast car area. I have a lot of experience doing customized Hot Wheels, Matchbox, Johnny Lightning, and similar die-cast toy cars (yes, Virginia, I'm a hopeless nerd). It's really pretty simple. Use your Dremel tool with a small ball grinder bit to carefully grind away the flanged-over portion of the rivet heads, then you'll be able to take the "car" apart. Work slowly and carefully, making sure to leave as much of the rivet shaft as you can, and don't grind away any of the chassis. When you're done doin' your thing, you can use a drop of JB Weld on each rivet head to put the "car" back together again. Voila! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|