Warbird Information Exchange https://www.warbirdinformationexchange.org/phpBB3/ |
|
R/C "Gunfighter" https://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=15&t=31089 |
Page 1 of 1 |
Author: | spookythecat [ Sat Jul 18, 2009 6:07 pm ] |
Post subject: | R/C "Gunfighter" |
I know Parkzone came out with a RTF (Ready To Fly) Mustang a few years ago in markings for Ferocious Frankie but I was surprised to see a new model in markings for Gunfighter. It looks awesome and I may have to pick one of these up (or maybe put in on my xmas list) ![]() http://www.horizonhobby.com/Products/De ... ID=PKZ1800 Be sure to watch the video listed in the right hand column. |
Author: | adflyer [ Sat Jul 18, 2009 9:49 pm ] |
Post subject: | |
I destroyed my "Frankie '51" so this may have to be the replacement. ![]() |
Author: | Punisher05 [ Sat Jul 25, 2009 5:56 pm ] |
Post subject: | |
I've seen the specs on it and it looks like a GOOD deal! I got a PZ FW-190 when they came out and put another $100 into it to upgrade to a brushless/lipo setup without having to change the RX/TX system. I then discovered that you can pull the wings off in a dive with the upgrades...my current incarnation has carbon fiber arrows in the wings for strength. The new PZ P-51 has all the brushless/lipo stuff already installed, plus the option for adding a 4th servo (rudder control). Add that it's on 2.4 Ghz instead of 29 Mhz (the old setup) and it looks like a winner... |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |