Warbird Information Exchange

We're trying to find out how many RPM are required for our hydraulic pump to achieve system pressure. (around 1500PSI)



Pump name is: Stratopower mfg by Watertown Division
The New York Air Brake Company
Starbuck Avenue
Watertown, NY

Part Number is hard to read. I think it is: 67VC300 2 rated at 1650 PSI GPM at 1500 PSI is 3 GPM or could be 8 GPM


Any idea what RPM this would need to turn at to achieve this pressure?

Its from an R-4360-59B.

_________________
Kevin Kearney
Vice President
Berlin Airlift Historical Foundation

C-54/R5D "Spirit of Freedom" BuNo 90414
C-97 "Angel of Deliverance" 52-2718

http://www.spiritoffreedom.org

Some of the engine maint books will give gear ratios of accessory drives.
If you could find that some math could give you the needed rpm.
That is f you get system pressure at idle or xyz engine rpm.

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!

That makes sense. I have an overhaul manual at the hangar.. Will be there tomorrow...

_________________
Kevin Kearney
Vice President
Berlin Airlift Historical Foundation

C-54/R5D "Spirit of Freedom" BuNo 90414
C-97 "Angel of Deliverance" 52-2718

http://www.spiritoffreedom.org