| Warbird Information Exchange http://www.warbirdinformationexchange.org/phpBB3/ |
|
| Need info on the props used on P-51C Thunderbird racer...... http://www.warbirdinformationexchange.org/phpBB3/viewtopic.php?f=17&t=63003 |
Page 1 of 1 |
| Author: | swede ware [ Sun Oct 16, 2016 4:14 pm ] |
| Post subject: | Need info on the props used on P-51C Thunderbird racer...... |
I am doing a 1/32nd scale model of the P-51C that was owned and raced by Jimmy Stewart. I have scratched in the vertical fillet, changed the cockpit and radio compartment. Now, what is stumping me is that in the info on this bird, it says that when the A/C was stripped down to reduce weight the Ham Stand "cuffed" props were replaced by "un-cuffed" Aeroproduct props. Now the photos that I can use to make out the props all seem to show the flat oval Ham Stand logo on the props, although there is a photo of the A/C with the pile of removed parts, including the "cuffed" Ham Stand props. The Aeroproducts logo is a round decal, not to be mistaken for the Ham Stand. The site with the best photos for the props on this A/C is ......https://www.thisdayinaviation.com/jacki ... er-n5528n/ If anyone has solid info on this I would really appreciate hearing from you. If anyone has info on any more photos of this A/C I would appreciate a heads up on this as well. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|